B&B Electronics R-SeeNet-5 - Manual - Manual (Page 40)

4. DESCRIPTION OF THE WEB INTERFACE
33
4.6 Add Device
The Add Device item from the Configuration part of the main menu is available only when
the Device List page is displayed. It is also necessary to have administrator privileges.
You can add routers to the R-SeeNet database in two ways. The first possibility is manually
fill and submit the form by clicking on the Add Device button. The items in this form have the
following meanings:
Item Description
Hostname IP address of primary SIM card
Hostname Alt IP address of secondary SIM card
MAC Address MAC address of the router being added
Description Description of the router being added
Community Password for SNMP access to routers
Location Location of the router being added
Note Any user-defined note about the router being added
Phone Phone number for sending SMS message
Phone Alt Alternative phone number for sending SMS message
Group Name of the routers group into which the router belongs
Read period Defines read period
Access mode Informs about the way of reading the router:
• Polling – router is reading in a standard way
• SNMP trap – router is reading via SNMP traps
Accounting Start Specifies when the accounting period begins
Table 12: Add Device
Items marked with an asterisk (see figure on the next page) can be blank.