B&B Electronics R-SeeNet-5 - Manual - Manual (Page 43)

4. DESCRIPTION OF THE WEB INTERFACE
36
4.7 Add Group
The Add Group item from the Configuration part of the main menu is available only when
the Group List page is displayed. It is also necessary to have administrator privileges.
Use the form on this page to add a group to the R-SeeNet database, which allows you to
define a certain number of routers. For each group you can define the following parameters:
Item Description
Name Group name
Level Limit Limit of signal quality
Traffic Limit Limit of data transmitted for primary SIM card
Traffic Limit Alt Limit of data transmitted for secondary SIM card
Report group window Period of updating information about the group of routers for
Report statistics (in minutes). This value must be higher than
the Read period value of all routers!
Table 13: Group List
The new group is added to the monitoring system by clicking on the Add Group button at
the bottom of this page.
Figure 50: Add Group