B&B Electronics R-SeeNet-5 - Manual - Manual (Page 29)

22
4. DESCRIPTION OF THE WEB INTERFACE
Continued from previous page
Column Description
Cells Number of switching between cells. After you place your cursor on
this number, there are displayed numbers of cells between which
the router switched.
Services Indicates how many times the router switched between different
technologies. After you place the cursor on this number, there are
displayed transmission technologies used in the period.
Table 8: Signal Strength
Number of switching between cells has only informative character. Switching is possible as
between neighboring cells so between different cells. If there is a large number of switching,
it means badly placed router antenna.
For routers ER75i, UR5i and UR5 the number of switching between cells may be different
from the actual value recorded in the router. This is due to the fact that the R-SeeNet detects
whether the cell was changed between two readings. Therefore, if your router will change the
cell to another and back between two readings, the monitoring system doesn
’t recognize it.
Figure 26: Signal Strength
Further it is possible to see a graph with the course of signal strength in a certain period
by pressing the graph image in a cell with the name of the selected period.
Figure 27: Signal Strength graph