B&B Electronics R-SeeNet-5 - Manual - Manual (Page 31)

24
4. DESCRIPTION OF THE WEB INTERFACE
Router Availability
The Router Availability part displays router availability statistics for a certain period. The
value of availability is determined based on the time of connecting the router to the network,
which is read from the router. The resulting value is calculated as a ratio of time when the router
was connected to the network to elapsed time from the interval. If the router is connected for
longer time than from midnight, availability is calculated as 100%.
If the router reading fails, router is considered to be available until it is successfully read.
Availability will be calculated using the newly read time of connecting the router to the network.
Figure 30: Router Availability
Further it is possible to see a graph with the course of router availability in a certain period
by pressing the graph image in a cell with the name of the selected period.
4.3.3 Device Parameters
Form on the Device Parameters page allows you to edit information about the router. It is
also possible to invoke this page by pressing the pencil icon (Edit ) in Device List.
Column Description
Hostname IP address of primary SIM card
Hostname Alt IP address of secondary SIM card
Description Description of the router
Location Location of the router. If Read location box on the Options page
is checked, R-SeeNet reads location, which is set in the router.
Coordinates Coordinates of the router. If GPS user module is available, the
coordinates are specified by this module.
Note Any user-defined note about the router
Community Password for SNMP access to routers
Group Name of the routers group into which the router belongs
Read period Defines read period (in minutes)
Phone Phone number for sending SMS message
Continued on next page