B&B Electronics R-SeeNet-5 - Manual - Manual (Page 32)

25
4. DESCRIPTION OF THE WEB INTERFACE
Continued from previous page
Column Description
Phone Alt Alternative phone number for sending SMS message
Enabled If it ’s checked, reading from the router via SNMP is enabled
AutoUpdate Enables automatic updating of router configuration
Read location Enables (or disables) reading position, which is set in the router
Access mode Informs about the way of reading the router:
• Polling – router is reading in a standard way
• SNMP trap – router is reading via SNMP traps
Accounting Start Specifies when the accounting period begins
Table 10: Device Parameters
The changes will be applied after pressing the Apply button.
Figure 31: Device Parameters