B&B Electronics R-SeeNet-5 - Manual - Manual (Page 33)

26
4. DESCRIPTION OF THE WEB INTERFACE
4.4 Group List
Monitored routers can be divided into groups. An overview of these groups can be invoked
by pressing the Group List item in Status section of main menu.
Column Description
:. Identifier of the group (sequence number of added group)
Name Group name
Level Limit Limit of signal quality
Traffic Limit Limit of data transmitted for primary SIM card
Traffic Limit Alt Limit of data transmitted for secondary SIM card
Operation
– Edit
Editing information about the group (pencil icon)
Operation
– Remove
Removes the group from the list (red cross icon)
Table 11: Group List
Functions in the Operation column (i.e. Edit and Remove) are only available to users with
administrative privileges.
Figure 32: Group List
Tips for working with Group List :
• Click on the name of the group to see Device List with routers belonging to this group.
• Number of groups displayed on one page can by specified by the numbers in the lower
right corner (25 and 100). To browse between pages use pagination in the same corner.
Another possibility is to write page number into the Go to page field and then press Enter.
• Groups can be sorted by identifier (:.) or group name (Name). Sorting can be done by
clicking on the column title. Press it again to rank groups in reverse order.
• Groups can be filtered by some criterion. At first specify the criterion into the box below
the name of the column and then press the Filter button.