B&B Electronics I-7565-H2 - Manual - Manual (Page 31)

Figure 4-14: Advanced Config of I-7565-H1/H2
<1> “Get CAN2USB Current Flow” option :
It is used to get the current CAN message flow (unit: fps) in
the CAN port of I-7565-H1/H2.
<2> “Get CAN2USB Hardware Speed” option :
It is used to get the current setting value for CAN to USB
hardware transmission speed of I-7565-H1/H2.
<3> “Set CAN2USB Hardware Speed” option :
It is used to set CAN to USB hardware transmission speed of
I-7565-H1/H2 module. Users can set the speed from 1000 fps
~ 3000 fps. The setting rule is that users can use “Get
CAN2USB Current Flow” function first to know the current
CAN message flow and then choose a setting value that is
larger a little than that. Apply the rule and it will reduce the
CAN message loss condition especially when the
performance on users’ PC is not good.
4.5 Data Log Function
By clicking “File” item in the menu bar to execute the related data log
function. The following is the illustration like Figure 4-15.
I-7565-H1/H2 High Speed USB/CAN Converter User’s Manual (Ver 1.1, Nov/2009) ------------- 31