B&B Electronics I-7565-H2 - Manual User Manual

Page 25

[1] For “CAN1/2 SendMsg” block :
<1>

“SendMsg Configuration” frame :

It is used to edit the CAN message parameters and users can
use “Add” button to add the CAN message to “CAN Message
Send Area”.

<2> “Add” button :

It will add the CAN message from “SendMsg Configuration”

area to the last row in “CAN Message Send Area”.

<3> “Modify” button :
It will modify the CAN message parameter from “SendMsg

Configuration” area to the assigned green row in “CAN
Message Send Area”.

<4> “Delete” button :

It will delete the CAN message of the assigned green row in
“CAN Message Send Area”.

<5> “Send” button :

<6> “HWSend” button :

It will send the CAN message of the assigned green row in
“CAN Message Send Area”. If the value in the “Timer” field is
zero, it will just send once. If not, it will send continuously by
module hardware timer and it will be more precise than PC
timer. If users want to send the CAN message with fixed
number, then before clicking “HWSend” button, please check
the “HWSendCnt” checkbox first like Figure 4-6.

I-7565-H1/H2 High Speed USB/CAN Converter User’s Manual (Ver 1.1, Nov/2009) ------------- 25