B&B Electronics I-7060 - Manual - Manual (Page 52)

52
I-7000 DIO Manual Rev:B1.2
Command : ~** No response
Reset the host watchcdog timer.
Wait for about 10 seconds and don’t send command ~**, the LED
of module will go to flash. The flash LED indicates the host watch-
dog timeout status is set.
Command : ~010
Receive : !0104
Read address 01 module status, return host watchdog timeout
status is set.
Command : ~011 Receive : !01
Reset address 01 host watchdog timeout status, return success.
And the LED of this module stop flash.
Command : ~010 Receive : !0100
Read address 01 module status, return host watchdog timeout
status is clear.
Related Command :
Sec.2.17 ~**, Sec.2.18 ~AA0, Sec.2.19 ~AA1, Sec.2.20 ~AA2,
Sec.2.22 ~AA4V, Sec.2.23 ~AA5V
Related Topic :
Sec.3.2 Module Status, Sec.3.3 Dual Watchdog Operation