B&B Electronics I-7060 - Manual - Manual (Page 33)

33
I-7000 DIO Manual Rev:B1.2
2.4 #AAN
Description : Read Digital Input Counter from channel N
Command : #AAN[CHK](cr)
#
delimiter character
AA address of reading module (00 to FF)
N channel to read
Response : Valid Command : !AA(Data)[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
(Data) digital input counter value in decimal, from 00000 to 65535
Example :
Command : #032
Receive : !0300103
Read address 03 digital input counter value of channel 2, re-
turn value 103.
Command : #025 Receive : ?02
Read address 02 digital input counter value of channel 5, re-
turn the channel is not available.
Related Command :
Sec.2.12 $AACN
Note :
The command is useless for I-7042/42D/43/43D/66/66D/67/67D.