B&B Electronics I-7060 - Manual - Manual (Page 48)

48
I-7000 DIO Manual Rev:B1.2
2.18 ~AA0
Description : Read Module Status
Command : ~AA0[CHK](cr)
~
delimiter character
AA address of reading module (00 to FF)
0 command for read module status
Response : Valid Command : !AASS[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
SS module status, 00=host watchdog timeout status is clear,
04=host watchdog timeout status is set. The status will
store into EEPROM and only may reset by the command
~AA1.
Example :
Refer Sec.2.21 ~AA3EVV example
Related Command :
Sec.2.17 ~**, Sec.2.19 ~AA1, Sec.2.20 ~AA2, Sec.2.21
~AA3EVV, Sec.2.22 ~AA4V, Sec.2.23 ~AA5V
Related Topic :
Sec.3.2 Module Status, Sec.3.3 Dual Watchdog Operation