B&B Electronics I-7060 - Manual - Manual (Page 34)

34
I-7000 DIO Manual Rev:B1.2
2.5 $AA2
Description : Read Configuration
Command : $AA2[CHK](cr)
$
delimiter character
AA address of reading module (00 to FF)
2 command for read configuration
Response : Valid Command : !AATTCCFF[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
TT type code of module, it must be 40
CC baudrate code of module (Ref Sec.1.9)
FF data format of module (Ref Sec.1.9)
Example :
Command : $012
Receive : !01400600
Read address 01 status, return DIO mode, baud 9600, no
checksum.
Related Command :
Sec2.1 %AANNTTCCFF
Related Topics :
Sec.1.9 Configuration Tables, Sec3.1 INIT* pin Operation