B&B Electronics I-7060 - Manual - Manual (Page 49)

49
I-7000 DIO Manual Rev:B1.2
2.19 ~AA1
Description : Reset Module Status
Command : ~AA1[CHK](cr)
~
delimiter character
AA address of setting module (00 to FF)
1 command for reset module status
Response : Valid Command : !AA[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example :
Refer Sec.2.21 ~AA3EVV example
Related Command :
Sec.2.17 ~**, Sec.2.18 ~AA0, Sec.2.20 ~AA2, Sec.2.21
~AA3EVV, Sec.2.22 ~AA4V, Sec.2.23 ~AA5V
Related Topic :
Sec.3.2 Module Status, Sec.3.3 Dual Watchdog Operation