B&B Electronics I-7060 - Manual - Manual (Page 51)

51
I-7000 DIO Manual Rev:B1.2
2.21 ~AA3EVV
Description : Set Host Watchdog Timeout Value
Command : ~AA3EVV[CHK](cr)
~
delimiter character
AA address of setting module (00 to FF)
3 command for set host watchdog timeout value
E 1=Enable/0=Disable host watchdog
VV timeout value, from 01 to FF, each for 0.1 second
Response : Valid Command : !AA[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
Example :
Command : ~010
Receive : !0100
Read address 01 module status, return host watchdog timeout
status is clear.
Command : ~013164 Receive : !01
Set address 01 host watchdog timeout value 10.0 seconds and
enable host watchdog, return success.
Command : ~012 Receive : !0164
Read address 01 host watchdog timeout value, return 10.0
seconds.