B&B Electronics I-7060 - Manual - Manual (Page 36)

36
I-7000 DIO Manual Rev:B1.2
2.7 $AA5
Description : Read Reset Status
Command : $AA5[CHK](cr)
$
delimiter character
AA address of reading module (00 to FF)
5 command for read reset status
Response : Valid Command : !AAS[CHK](cr)
Invalid Command : ?AA[CHK](cr)
Syntax error or communication error may get no
response.
! delimiter for valid command
? delimiter for invalid command
AA address of response module(00 to FF)
S reset status, 1 = the module is been reset, 0 = the module is
not been reseted
Example :
Command : $015
Receive : !011
Read address 01 reset status, return first read.
Command : $015 Receive : !010
Read address 01 reset status, return no reset occurred.
Related Topics :
Sec3.4 Reset Status