TC Electronic Broadcast 6000 - Manual (Page 35)

35
paGe Head
operation
35
paGe Head frame sysTem - maIn
MIDI Control Page
On MIDI Control Page the following options are
available:
Read Program Change
Select whether the Frame should read incoming program
changes or not.
Send Program Change
Select whether the Frame should send program changes to
MIDI out when presets are recalled via TC Icon or the TC
Icon Software editor.
Read Control Change
Select whether the Frame should Read Control Changes
messages.
Send Control Change
Options here are Single (7 bit) or Double (14 bit) precision.
Read SysEx - Send SysEx
These two parameters determine whether the Frame
should read and send SysEx.
MIDI Dump Page
Pressing these command buttons will dump the
current settings as SysEx messages to the MIDI Out
port of the Mainframe.
If connected to a MIDI sequencing device it is then
possible to store/recall current settings as part of your
sequencing project or as backup handling via MIDI.
Dump Scene
Press to dump the current scene to MIDI.
Scene presets include all current Routing and Engine
presets.
Dump Routing
Press to dump only the current Routing to MIDI.
No Engine settings are dumped.
Dump E1-4
Press to dump all currently loaded Engine settings to MIDI.
Presets loaded in all 4 Engines are included.
Dump E1, Dump E2, Dump E3 & Dump E4
These four keys are used to dump currently loaded preset
from a single Engine to MIDI.