TC Electronic Broadcast 6000 - Manual (Page 26)

26
lIbrary - reCall
Library Recall
On the Library Recall page the following banks are
available for recall operations.
Scene
Gives access to the following preset banks:
• Factory F1: Scene ROM bank
• User U1: User Scene bank
Routing
Gives access to the following preset banks:
• Factory F1: ROM bank
• User U1: User Scene bank
Engine 1-4
Gives access to the following preset banks:
• Factory Reverb banks (For Reverb 6000)*
• Factory Master (mastering) banks (For Mastering 6000)*
• User banks
If both Mastering and Reverb options are installed, the
Factory button is used to switch between Reverb and
Mastering presets.
Recalling a Scene or an Engine preset
• Press the RECALL tab to select the Recall page.
• Now select the level of: Scene, Routing or Engine 1-4.
• Select which bank you wish to recall from: Factory
or User. If a System 6000 formatted PCMCIA card
is inserted in the Mainframe, card-banks will also be
available and displayed below the User banks.
• Select presets pressing:
Bank, Decade (=tens) and preset number.
(grayed out numbers indicates that the Decade is empty)
• Press the Recall key to recall/load the preset.
When trying to load an algorithm that requires more
DSP power than currently is free, a Pop-up display
will ask to load the “Empty Engine” preset into an
Engine of your choice. The “Empty Engine” preset is
located as preset 00 in the Reverb Music bank.
Search / Wizard Algorithm Filter
See next page.
Operation Level Tabs Bank Selectors
Function
Select
Tabs
Library, Frame and Engine selectors
Parameter Fader
values present in
the last modified
Engine.
Fader
Group
Selector
Search