Cobalt Digital COMPASS 9220 Bidirectional ASI_MPTS Gateway - Manual (Page 49)

49 9220-UM V1.1
•
Card Name: This field defaults to “9220” but can be set to any descriptive name. The
name provided here will also appear in the Dashboard™ Tree View.
•
SNMP Traps: This allows SNMP traps to be enabled or disabled
3
. Note that this
setting does not take effect immediately – it will become active the next time the card is
rebooted.
•
MIB File Download: The 9220 provides an up-to-date copy of its MIBs. If you click
on the Save button, a zip file with the relevant MIBs will be downloaded to your
computer. This zip file contains the card MIBs, as well as the Ross Video and
openGear MIBs required to compile the card MIBs.
The Admin General Tab is depicted below:
Admin Firmware Tab
The 9220 can hold up to three distinct firmware images: a Factory image, and two upgrade
images, called Image 1 and Image 2. The Factory image can never be overwritten, and will
always be available as a fall-back in case of problems or failed updates. Image 1 and Image 2
can be updated at will. Since the card offers two upgrade images, it is always possible to fall
back to the previous image if there are any problems with the current one. The card will also
automatically fall back to the factory image if it detects a corrupted firmware image. Finally, the
push buttons on the front of the card allow for a forced override to the factory image, as
described in the Front Switches section.
9220 firmware is updated in the same fashion as with any standard openGear™ card. Once you
obtained the upgrade image from Cobalt Digital Inc., place it anywhere in your computer and
click on the DashBoard Upload button, as shown below. A dialog box allows you to select the
upgrade file. Note that you can simultaneously upgrade all of your 9220 cards over multiple
chassis if you wish. For more detail, consult the Dashboard User Manual, chapter 6, section
Upgrading Device Software. The Dashboard manual can be downloaded from:
http://www.opengear.tv/n/?p=94
3
SNMP is an optional feature in the openGear™ frame controller. The 9220 SNMP functions are only available if
SNMP is licensed in the frame controller.