V-Tech DT-IP Technical Guide - Manual (Page 46)

§ 3.2. IP‐Device Introduction
IP-Device is used to construct a new project and save project info to a database for IP-
Agent whose info is based on the database.
Recommended Configuration Route:
Project Property -> IP Node Config -> Block Config -> Guard Centre Priority Setting -> Call
Table for Blocks -> Call Table for Common Entrance -> Parameter Management for Blocks
and Common Entrance
IP Device Interface Instructions
1. Project Property
Start the IP Device Software
Click the right mouse button on Default Project, then it will pop up a menu. Select Project Property
-44-
IP-2 wire system technical guide