Veris Technologies VIS_NIR Spectrophotometer Probe - Operating Instructions - Manual (Page 81)

OM17-P4000VIS-NIR
8-5
Appendix
#1 Program Modifications
The files in the C:\Veris directory are used to store configuration settings for the Veris
Operating software. These are set to default values, but can be changed.
Veris directory files
Description
acq_settings.txt
Stores acquisition settings, these
can be configured by the user.
Ex.
0.010 19.000 5.000 15.000 0.150 0.150 0.300 0.150 2.000
These values represent the following controls in this order:
Reference check tolerance
Hamamatsu integration time (ms)
Seconds of data to average
Ocean Optics integration time (ms)
External reference #1 max allowed RMSE
External reference #2 max allowed RMSE
External reference #3 max allowed RMSE
External reference #4 max allowed RMSE
GPS Quality Factor (2 = DGPS 1 = GPS 0 = No GPS)
cluster settings.txt
Stores cluster settings, which can be
configured by the user
Ex.
3 15
These values represent the following controls in this order:
Number of principal components to use
Number of clusters
interpolation.txt
Stores interpolation settings, which can
be configured by the user.
Ex.
0.100 1.000 2.000 1.000 15.000 0.000 3.000
These values represent the following controls in this order:
Depth increments (probe mode only)
Sample points longitude column