Veris Technologies VIS_NIR Spectrophotometer Probe - Operating Instructions - Manual (Page 65)

OM17-P4000VIS-NIR
7-5
How to check Ocean Optics spectrometer
1) Click on start Programs  Ocean Optics  OOIBase32  Start OOIBase32
software
2) Check graph it see if spectrum is present (see figure below). The spectrum
should change as different objects are placed in front of the window on the
probe.
Figure 1
3) If there is no spectrum present or graph does not update as objects are placed
beneath the shank. Then the spectrometer needs to be configured. To
configure click on spectrometer  configure  A/D Interface tab