Veris Technologies VIS_NIR Spectrophotometer Probe - Operating Instructions - Manual (Page 45)

OM17-P4000VIS-NIR
5-8
Field Operations
Probe Rotation Option
An optional accessory for the P4000 is the Probe Inverter Option. This allows the
operator to quickly rotate the NIR/EC force probe upwards to allow access to the coring
tools without removal of the probe itself.
Below Figure 16 shows the NIR/EC force probe rotated down. To rotate upwards first
pull the quick latch as shown in Figure 16
Next rotate the probe to the up position as shown in Figure 17
Figure 16 Figure 17