Veris Technologies VIS_NIR Spectrophotometer Probe - Operating Instructions User Manual

Page 59

Text mode
Original mode

OM17-P4000VIS-NIR

6-9

Probe Removal

This procedure is needed when removing the probe for bench top use, road transport,
or for soil coring.

Step 1:
Disconnect the fibers from the spectrometer case, and the cables to the auxiliary case.

Step 2:
Remove loom from clip.

Step 3:

Figure 16

Step 3:

Firmly grasp probe, and remove the mounting pin holding the probe on the platform.

Cables

Fibers

Loom
Clip

Mounting
Pin