Ohaus AS Series Electronic Balances - Manual (Page 85)

16
Field: Model # EPROM # CR LF
Length: 7 15 1 1
Command Command Command Command Command
Character Character Character Character Character Description Description Description Description Description
xS xS xS xS xS Set stable data only printing (set x = 0 for OFF, or x = 1 for ON).
T T T T T Same effect as pressing tare button
V V V V V Print EPROM version
xZ xZ xZ xZ xZ Set Auto Zero to “x”,
where x = 0 to 3 (see table).
Esc L Esc L Esc L Esc L Esc L Prints listing of Setup and Print menu settings.
Esc R Esc R Esc R Esc R Esc R Resets Setup and Print menus to factory defaults.
CAUTION: This will reset RS232 configuration.
Esc S Esc S Esc S Esc S Esc S Save current settings.
RS232 COMMAND TABLE (Cont.) RS232 COMMAND TABLE (Cont.) RS232 COMMAND TABLE (Cont.) RS232 COMMAND TABLE (Cont.) RS232 COMMAND TABLE (Cont.)
Balance Model
"98101-XX Sr*XX.X"
0 = OFF
1 = .5 d
2 = 1 d
3 = 3 d