Using menus to configure the balance – Ohaus AS Series Electronic Balances User Manual

Page 46

SETUP

LFT
On, Off

Off

SEL

g, dwt , ct, oz t ,

mommes,taels 1,2,3

LOCSW

Calibration
User
Setup
Print
End

END

USER

RESET

Yes, No

0, 1

1, 2, 3

STB

.5d, 1d

1d, 2d,

AUTO-0

OFF , .5d ,

.5d ,

1d , 3d

END

CAL

SPAN

LIN

END

USING MENUS TO CONFIGURE THE BALANCE

The Model AS60C Analytical Standard balance contains four display menus which
enable you to calibrate and configure the balance for your specific operating require-
ments.

Calibration Menu:

Calibration Menu: Used to calibrate the balance for span or linearity.

User Menu:

Used to adapt the balance to environmental conditions.

Setup Menu:

Used to enable or disable different balance features.

Print Menu:

Used to configure the RS232 Interface.

Functions not allowed on verified balances have shaded backgrounds.

NOTE:
PRINT menu appears only
when RS232 option is in-
stalled.

To access a menu, press and hold

until desired menu appears, then release it.

Original factory default settings are shown in plain boldface type.

Use these buttons to step through menus and select submenus:

next selection

select

displayed item