Ohaus AS Series Electronic Balances - Manual (Page 23)

23
Type Approved Balance Type Approved Balance Type Approved Balance Type Approved Balance Type Approved Balance
This parameter can be set to ON or OFF.
Selecting ON automatically sets certain
parameters for type approved require-
ments.
1. Access the LFT submenu.
2. The display will show the current
status (ON/OFF). If ON is selected,
Auto-Zero Tracking will be limited to
0.5d or OFF and Lock switch default
becomes Setup.
3. Press to change the status.
4. Press to accept the status.
5. When is released, the display
will show LFT.
To access a submenu:
1. Repeatedly press until the
desired submenu is displayed.
2. Press to select the displayed
submenu.
NOTE NOTE NOTE NOTE NOTE: You must use END to store any
changes you make to the Setup menu.
The following sections describe each item
on the Setup menu in detail.