Ohaus AS Series Electronic Balances - Manual (Page 39)

5
INTRODUCTION
This manual covers installation, operation and troubleshooting for the Ohaus Analytical
Standard balance Model AS60C. The type approved Analytical Standard balance is
setup to conform to OIML, EC and U.S. regulations. To insure proper operation of the
balance, please read this manual completely.
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
The Ohaus Analytical Standard Model AS60C balance is a precision weighing
instrument, designed to provide years of service with virtually no maintenance. The
Analytical Standard is constructed using a die-cast aluminum base finished with a
durable epoxy powder paint which is resistant to commonly used acids, contains a one
piece solid-state precision electronics PC board and a seven digit LCD display which
is 0.6 inches in height. The Analytical Standard electronic balance is factory set to
measure in grams or carats. A software menu allows measurements in grams (g), troy
ounces (oz t), pennyweight (dwt), mommes (:), carats (ct), and taels for Hong Kong,
Singapore and Taiwan. To prevent measurements from being affected by air currents,
a draft shield is mounted to the balance. A stainless-steel spill ring is removable for
cleaning in the event of accidental spills. Power is supplied through an AC adapter
which is available in five voltages for world-wide usage. Accessories include: an
RS232 interface kit which allows printing of results through an external computer, an
RS232 interface cable with a print switch, a security device and calibration weights.
ANALYTICAL STANDARD Balance