Ohaus AS Series Electronic Balances - Manual (Page 19)

19
Averaging Level Averaging Level Averaging Level Averaging Level Averaging Level
Averaging level compensates for vibra-
tion or excessive air currents. During op-
eration, the balance continually takes
weight readings from the weighing cell.
Successive readings are then digitally pro-
cessed to achieve a stabilized display.
Use this submenu to specify how much
processing you need to obtain stable re-
sults.
NOTE: Averaging level does not affect
balance accuracy.
Select one of four averaging levels using
the adjacent table as a guide.
To view or change the averaging level:
1. Access the AL submenu to display
the current setting.
2. Press to change the setting.
3. Press to accept the displayed
setting.
4. When is released, AL will be
displayed again and the Setup menu
will be returned.
AVERAGING LEVEL AVERAGING LEVEL AVERAGING LEVEL AVERAGING LEVEL AVERAGING LEVEL
AL 0 reduced stability, fastest
stabilization time
AL AL AL AL AL 1 normal stability, normal 1 normal stability, normal 1 normal stability, normal 1 normal stability, normal 1 normal stability, normal
stabilization time
stabilization time stabilization time stabilization time stabilization time
AL 2 more stability, slow stabi-
lization time
AL 3 maximum stability, slow-
est stabilization time