Ohaus AS Series Electronic Balances - Manual (Page 8)

8
Pan Pan Pan Pan Pan
Place the pan into the hole in the weighing
mechanism.
AC ADAPTER
RECEPTACLE
PAN
AC Adapter AC Adapter AC Adapter AC Adapter AC Adapter
Plug the molded connector of the AC
Adapter into the receptacle at the rear of
the balance. Plug the AC Adapter into a
convenient ac outlet. When power is ap-
plied to the balance, it will begin a 60
second self test cycle. During this time, if
the balance is turned ON, the display will
count down from 60 and display the word
CHEC.
Leveling the Balance Leveling the Balance Leveling the Balance Leveling the Balance Leveling the Balance
The balance is equipped with a level
indicator on the rear and two adjustable
leveling feet. Adjust the leveling feet
until the bubble appears in the center
circle of the indicator.
SPILL RING
LEVEL INDICATOR
LEVELING FEET (2)