Setup menu, Setup menu protection – Ohaus AS Series Electronic Balances User Manual

Page 56

Setup Menu Protection

The Setup menu may be locked out to
prevent unauthorized personnel from
changing settings. To lock out the Setup
menu, refer to the section titled Menu
Lock-Out Protection.

NOTE

NOTE: If -SAFE- is displayed, the Setup
menu has been locked out. Settings may
be viewed but not changed. See the Menu
Lock-Out Protection section to enable it
for making changes.

Sets balance for type approved oper-
ation.

Specifies which weighing units and
operating modes will be available for
operation.

Enables individual or all menus to be
locked out.

Used to exit the Setup menu and
store your selections.

SETUP MENU

The Setup menu enables you to retain program balance parameters once they have
been set. Access to the Setup menu can be disabled using the Lock out switch. The
following table shows the sequence in which submenus appear on the Setup menu.

SETUP MENU TABLE

To access the Setup menu, press and

hold

until SETUP is displayed, then

release it.