Ohaus AS Series Electronic Balances - Manual (Page 82)

13
MENU LOCK-OUT PROTECTION MENU LOCK-OUT PROTECTION MENU LOCK-OUT PROTECTION MENU LOCK-OUT PROTECTION MENU LOCK-OUT PROTECTION
Access to the Print Menu can be disabled using the lock-out switch located under the
right side of the balance, near the display.
1. Turn display off and unplug the power cord.
2. Slide the balance toward you, with the front over the edge of a table. (You can also
turn the balance on its left side, but if you do, you MUST remove the draft shield,
pan and pan support first!)
3. Locate hole under display where
switch is located.
4. Using a small screwdriver, slide the
switch forward for LOCKED or back
for UNLOCKED.
5. Plug in the power cord and turn on the
balance.
LOCK-OUT SWITCH
UNLOCK
LOCK