Ohaus AS Series Electronic Balances - Manual (Page 77)

8
Reset to Factory Defaults Reset to Factory Defaults Reset to Factory Defaults Reset to Factory Defaults Reset to Factory Defaults
This submenu enables you to reset all
RS232 menu selections to the original
factory default settings outlined in the ad-
jacent table.
To reset to factory defaults:
1. Access the Reset submenu to view
the current setting.
2. Press to change the setting.
(Select YES to reset settings or,
NO to leave current settings.)
Press to accept the displayed
setting.
To access a submenu:
1. Repeatedly press until the de-
sired submenu is displayed.
2. Press to select the displayed
submenu.
NOTE: NOTE: NOTE: NOTE: NOTE: You must use END to store any
changes you make to the Print menu.
The following sections describe each item
on the Print menu in detail.
ON ON ON ON ON
TARE TARE TARE TARE TARE
OFF OFF OFF OFF OFF
MODE MODE MODE MODE MODE
PRINT MENU PRINT MENU PRINT MENU PRINT MENU PRINT MENU
FACTORY DEFAULTS FACTORY DEFAULTS FACTORY DEFAULTS FACTORY DEFAULTS FACTORY DEFAULTS
Baud rate br 2400
Data Bits 7 data
Parity None
Stop Bits 2 stop
Auto Print OFF
Stable Data Only OFF
Numeric Data Only OFF
ON ON ON ON ON
TARE TARE TARE TARE TARE
OFF OFF OFF OFF OFF
MODE MODE MODE MODE MODE