Ohaus AS Series Electronic Balances - Manual (Page 80)

11
Auto Print Feature Auto Print Feature Auto Print Feature Auto Print Feature Auto Print Feature
When enabled, the Auto Print feature
causes the balance to automatically out-
put display data in one of two ways: con-
tinuously, or upon stability.
To select one of these Auto Print methods,
or to turn the feature off:
1. Access the AutoP submenu to dis-
play the current setting.
2. Press to change the setting.
Press to accept the displayed
setting.
When is released, AUTOP will be
displayed again and the Print menu will be
returned.
.
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
Print Stable Data Only Print Stable Data Only Print Stable Data Only Print Stable Data Only Print Stable Data Only
When enabled, this feature permits only
stable display data to be output. To set the
feature ON or OFF:
1. Access the Stable submenu to dis-
play the current status.
2. Press to change the status.
Press to accept the displayed
status.
OFF OFF OFF OFF OFF
MODE MODE MODE MODE MODE
ON ON ON ON ON
TARE TARE TARE TARE TARE
OFF OFF OFF OFF OFF
MODE MODE MODE MODE MODE