Ohaus AS Series Electronic Balances - Manual (Page 84)

15
RS232 COMMAND TABLE RS232 COMMAND TABLE RS232 COMMAND TABLE RS232 COMMAND TABLE RS232 COMMAND TABLE
Command Command Command Command Command
Character Character Character Character Character Description Description Description Description Description
? ? ? ? ? Print current mode
nnnA nnnA nnnA nnnA nnnA Set Auto Print feature to “n”
(see table).
C C C C C Begin span calibration
xD xD xD xD xD Set 1 second print delay (set x = 0 for OFF, or x = 1 for ON)
x x x x x IIIII Set Averaging Level to “x”,
where x = 0 to 3 (see table).
L L L L L Begin linearity calibration
Field: Mode Stab CR LF
Length: 5 1 1 1
blank if stable
“ ? ” if unstable
n = 0 Turns feature OFF
n = S Output on stability
n = C Output is continuous
Grams
Pennyweight
Carats
Avoidupois ounces
Troy ounces
Grains
Taels Momme
Pounds
Pounds:ounces
Custom unit
Parts counting
Percent weighing
Error
0 = minimum level
1 =
2 =
3 = maximum level
P P P P P Print display data
When “numeric only” display
data is selected for output in
the RS232 menu, the Mode
field is not output.
Displayed weight sent right justified w/lead
zero blanking.
Nine characters include:
decimal point (1)
weight (7 max))
polarity (1): blank if positive
“ - ” if negative
Field: Weight Mode Stab CR LF
Length: 9 1 5 1 1 1
Same as ? command