M&C TechGroup MP26-H1 Operator's manual - Manual (Page 8)

8
Gas sampling and gas conditioning technology 6-1.1.15-ME
8 TECHNICAL DATA
Diaphragm pump MP26-H1..
Part number 02P1300 02P1305
Power supply 230V,50Hz 115V,60Hz
Degree of protection IP 44 - DIN 40050
Capacity max. 10,0 l/min without pressure
Operating pressure 0,3 to 2,2 bar abs.
Sample temperature -30 to +80°C
Ambient temperature -10 to +40°C
Storage temperature -15 to +60°C
Gas connections G1/4" i
DIN ISO 228/1
Electrical standard EN 61010 Part 1
Material of sample wetted parts PTFE
Weight 6,5 Kg
8.1 AMBIENT CONDITIONS
When the pump is in operation the following ambient conditions must be maintained:

Ambient temperature during operating: -10°C .... + 40°C;

The pump must be protected from the effects of dust and water;

During operating an adequate supply of air for cooling must be provided.
9 FLOW CHARACTERISTICS
The following chart shows the performance of the diaphragm pump type MP26-H1.
0
100
200
300
400
500
600
700
800
900
1000
0,24 0,3 0,4 0,6 0,8 1 1,5 2 2,5
[l
/h
r]
20°C
180°C
[bar abs.]
Figure 1 Flow characteristics MP26-H1