M&C TechGroup SP2100-H Operator's manual - Manual (Page 8)

8
Gas sampling and gas conditioning technology 2-1.0-ME
7 TECHNICAL DATA
Probe series SP® compact version SP 2100-H
Part No. 10S1000
Sample tube Type SS, stainless steel 316Ti, length 1 m*
Sample temperature max. 600 °C*
Sample pressure 0.4 to 2 bar abs.
Ambient temperature -20 °C to +60 °C
Recommended for dust loadings up to 2 g/m
3
*
Filter chamber volume 120 ml
Filter element S-2K 150, filter porosity 2 μm, ceramic
Probe heating temperature +180 °C self-regulating
Ready for operation after 2 hours
Temperature alarm contact, alarm point <160 °C, NO
Temperature alarm, contact rating 250V-3A AC, 30V-3A DC
Connection sample outlet 1/4"-NPT inside, for max. 10 mm tube connectors
Power supply 110 up to 240V 50 / 60Hz
Power consumption start up: 400VA, usual: 100VA, (fuse 6A)
Electrical connection terminals max. 2,5 mm
2
, 2x PG11 cable gland
Electrical equipment standard EN 61010, EN 60335-1
Degree of protection IP54, EN 60529
Mounting flange DN65 PN6,B stainless steel 316Ti
Material of sample contacting parts SS 316 / 316Ti, FPM, ceramic
Weight 9 kg
Options not available

P und T90 at flow of: 100 200 500 1000 Nl/h

P pressure loss with new filter element S-2K150: 0,007 0,011 0,020 0,035 bar
T90 time-without sample tube/prefilter- 6,0 3,5 1,0 <0,5 sec
8 APPLICATIONS
The patented M&C SP2100-H gas sample probe is used for continuous gas sampling in processes
with dust densities of up to 2g/m³, operating pressure up to max. 2 bar abs., temperatures of up to a
maximum of 600°C or higher gas humidity. Thanks to its compact design it requires only limited space.
It has to be mounted in a weatherproof position.
9 DESCRIPTION
The sample probes are designed for easy installation, reliable operation and trouble-free maintenance.
Filter elements can be changed without the need for tools and without disconnecting the sample line,
the filter chamber can be cleaned easily and the probe tube can be cleaned without removing the
probe:
these are just a few of the many advantages offered by this probe.
The 2 µm ceramic filter element, which has a large surface, is located in a stainless steel filter
housing.
The gas sample probe is heated up to + 180°C using a special self-regulating heating element. No
thermostat or temperature limiter is necessary.
A separate thermo switch is provided for under-temperature monitoring (< 160°C, NO ).