M&C TechGroup SR25.1_Ex Operator's manual - Manual (Page 17)

3-7.1-ME Gas sampling and gas conditioning technology 17
14.2.1 CLEANING THE PUMP HEAD
 When changing flexible tube or other parts, inspect all parts for dirt before assembling the
pump head and clean them if necessary.
 As far as possible clean the parts with a dry cloth. Solvents should not be used as they can
attack the plastics and synthetic rubber parts. If a compressed air line is available, blow the
parts out with it.
C A R E !
Aggressive sample is possible !
Wear protective glasses and proper protective clothing during
disassembly, repair or cleaning !
15
REPAIR INFORMATION
N O T E !
If you send the peristaltic pump back to M&C for repair please indicate
the kind of pumping medium. The pump has to be cleaned from
dangerous and high aggressive contaminating before reshipment.
16
SPARE PARTS LIST
Wear, tear and replacement part requirements depend on specific operating conditions.
The recommended quantities are based on experience and they are not binding.
Peristaltic pump SR25.1, SR25.2-G, SR25.1/EX
(C) Consumable parts
(R) Recommended spare parts
(S) Spare parts
Recommended quantity being in
operation [years]
Part No. Indication C/R/S 1 2 3
90 P 1007 Hose set

SR25.1
with PVDF-tube connectors 4/6mm, standard
C 1 2 4
90 P 1006 Hose set

SR25.1
with PVDF-tube nipples 6mm
C 1 2 4
90 P 1020 Driver SR25, complete S - 1 1
90 P 1010 1 set (4 pcs) contact springs

SR25 for driver R 1 2 2
90 P 1045 Contact pulley SR25 PVDF

for driver S 2 4 4
90 P 1050 Conveying belt SR25.1
 S - 1 2
90 P 1025 S-bolt

SR25.1 S - - 1
01 P 1000 Peristaltic pump SR25.1, complete 230V/115V, 50/60Hz R - - 1
90 P 1030 Head peristaltic pump SR25.1, complete without motor and gears S - - 1
90 P 1031 Head peristaltic pump SR25.2, complete without tube set, motor and
gears S - - 1