EVS IPBrowse Version 6.0 - November 2012 User's Manual - Manual (Page 77)

IPBrowse Version 6.0 – User Manual
EVS Broadcast Equipment – November 2012
Issue 6.0.B
69
8. Publishing and Transferring
Clips
8.1 Introduction
With IPBrowse, a bin content is made available to other users either by publishing the bin
or by transferring the bin content.
Clips can be sent to various destinations, including third party systems (i.e. NLE systems)
and storage paths. The transfer is initiated from the Bins pane. Clips may automatically
be sent to a target as soon as they are put into a bin or they can be selected later on from
the Bins pane. The transfer may concern a selection of clips or clips from an entire bin.
The choice of several targets is possible and the transfer can be monitored from the
interface.
8.2 Publishing a Bin
8.2.1 Purpose and Context of Use
Rather than sending a bin content to a target destination, users may want to simply show
the clips from a bin to a group of users. They can publish the bin to a selected group.
8.2.2 How to Publish a Bin
To publish a bin, proceed as follows:
1. From the bin tab you want to publish, click the Publish button.
The Publish window opens.
2. Select the user group(s) to which you want to publish the bin in the Available
Groups area on the left. Keep CTRL pressed for a multiple selection.
3. Click the Right Arrow button to move the selected user groups from the Available
Groups area to the Selected Group area on the right.
4. Click the Publish button at the bottom of the Publish window.
To un-publish a bin to a group of users, repeat steps 1 to 4 and perform the opposite
operation: select the user group in the Selected Group area and click the Left Arrow
button.