Creating a clip and sending it to a bin, 1 introduction, 2 clip settings – EVS IPBrowse Version 6.0 - November 2012 User's Manual User Manual
Page 64: 1 define clip autoname, Reating a, Lip and, Ending it to a, Introduction, Clip settings, Define clip autoname
Issue 6.0.B
IPBrowse Version 6.0 – User Manual
EVS Broadcast Equipment – November 2012
56
6. Creating a Clip and Sending it
to a Bin
6.1 Introduction
As soon as a media has been loaded, users can create a new clip from this loaded media
thanks to the clip creation functions of the Player pane. A clip can be created from a
record train, a recording ingest or a clip. An existing clip can be re-trimmed on the Player
pane, if it has not been protected.
Clips are sent to a bin as soon as they are saved. So, a bin must have been selected
prior to or at clip creation. Refer to section 6.6 ‘Sending a Clip to a Bin’ on page 60.
6.2 Clip Settings
Most of the settings cannot be defined from the IPBrowse interface and are directly
applied from IPDirector.
The only settings that the user can configure from the IPBrowse interface relate to auto-
naming of clip and the display of the Save Clip window.
6.2.1 Define Clip Autoname
The Define Autoname setting allows the user to define auto-naming rules for new clips.
To define a clip auto-name, proceed as follows:
1.
Click the Tools button
on the main toolbar.
A contextual menu is displayed.
2.
Select Define Autoname.
The Autoname window opens and lists the various possible format string options
with a brief explanation: