EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 74)

3.3. Server Tab
3.3.1. Overview
Server Tab
The Server tab consists of a single page in the basic or advanced mode in the server-
based application. It covers the settings related to video codecs and standards, time
reference, phase definition, interpolation activation, and PC LAN.
Settings List
The table below presents the settings of the Server tab. It specifies whether the setting is
available:
• in the basic or advanced display mode in the server-based and web-based interfaces
• in the Technical Setup menu of the Remote Panel.
Setting Name Basic Advanced
Technical
Setup
Video and reference settings P1 P1
Field rate X X
Resolution X X
Codec X X
Bitrate X X
Horizontal Res./Recorded Lines X
LTC Timecode X X
Sync PC Time to TC X
Genlock X X
Phase definition settings P1 T1.1
SD X X
HD to SD SDI X X
Interpolation settings P1 T1.2
Vertical interp. X X
Four Lines X X
PC LAN settings P1
IP Address X X
66 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013