EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 42)

2.4.3. Entering and Removing License Codes
Introduction
When you request new license codes to activate one or more features, you can receive
the license keys from EVS in the form of:
• a xxxxx.COD file (xxxxx = serial number of the server for which this file has been
calculated). You need to apply this file to the EVS server from the Option codes
management window.
• a license code that you can type in the Option codes management window.
Once the license codes have been entered, the corresponding options or features are
automatically active when you launch a configuration, without having to reboot the server.
How to Enter License Codes from a COD File
In the Server-Based Application
To enter a new license code delivered via a COD file, proceed in one of the following
ways:
1. Copy the .COD file on a USB key that you connect to the USB port of the EVS server.
2. From the Multicam Setup window, press O to open the Options codes management
window.
3. Press simultaneously ALT+ U keys.
OR
1. Copy manually the .COD file to the C:\ drive of the EVS server.
2. In the Multicam Setup menu, press O to open the Options codes management
window.
3. Press simultaneously ALT+ F keys.
The license codes will be read from the .COD file and updated into the system. Next to
the line corresponding to the code, the license type, and the expiration date, if any, are
displayed.
34 2. Multicam Setup
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013