Video effect duration, Wipe type, Default playlist speed – EVS XS Version 11.02 - July 2013 Configuration Manual User Manual
Page 184: Insert in playlist
Video effect duration
Description
Sets the duration of video transition effect. The specified value
is used as default value in the Playlist Edit mode.
Note that the duration of the video transition when using the
TAKE button in 1PGM+PRV mode has its own parameter,
Effect for take, defined in the EVS Controller section of the
Operation tab.
Values
0s00fr to 20s00fr
Default value
00s10fr
Wipe type
Description
Specifies the vertical wipe effects from Left to Right or from
Right to Left.
Values
Vert. L>R / Vert. R>L
Default value
Vert. L > R
Default playlist speed
Description
Defines the default speed used to play clips in a playlist.
Values
The following values are possible Unknown, and from 0% to
100%:
•
Unknown means that the speed of the previous clip in the
playlist will be used as a reference for the current clip.
•
0% will force the playlist to pause at the end of each clip.
•
1% to 100% will apply the specified speed as default
speed for playlist elements.
Default value
Unknown
Insert in playlist
Description
Specifies if the clips add to a playlist are insert before or after
the active clip in the playlist.
Values
After / Before
Default value
Before
176
3. Multicam Configuration
EVS Broadcast Equipment S.A.
Issue 11.02.A July 2013