EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 193)

Push Mode
Description Specifies how the clips should be sent using the PUSH
function, that is to say with or without the original guardbands.
Values The following values are possible:
• Short:
The clips are sent from the Short IN to the Short OUT
points, to which the guardbands of the destination machine
are added.
• Long:
The clips are sent from the Protect IN to the Protect OUT.
Default Values Short
Push Receive Page
Description Specifies the page of your machine where clips sent to you by
other network operators using the PUSH function must be
stored.
See section "Navigating and Editing in the Multicam
Configuration Window" on page 49 for more information on
how to enable pages
Values Page 1 to 10 (=0). Several pages can be selected.
Default Values (Page) 5
CONFIGURATION MANUAL XS Server 11.02
3. Multicam Configuration 185