EVS XS Version 11.02 - July 2013 Configuration Manual - Manual (Page 170)

The tally function is now active, and works as follows:
When the server receives a ‘Mark tally’ GPI IN, an IN point is marked on the
corresponding record train (for ex. cam a). When a second ‘Mark Tally’ GPI IN is received
on a different record train (for ex. cam b), the server marks an OUT point on the first record
train (cam a) and an IN point on the second record train (cam b). All the clips created this
way are added to the defined playlist.
Tally
Description Activate or deactivate the tally function.
Values Yes/No
Default Value Yes
Add Clip to PL
Description Selects the LSM ID of the playlist to which the tally clips will be
added.
Values 10 to 99
Default Value 99
Clips guardbands
Description Specifies the guardbands length of the tally clips, in seconds.
Values 0 to 250
Default Value 0
162 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013