EVS XS Version 11.02 - July 2013 Configuration Manual User Manual
Page 58
![background image](/manuals/254156/58/background.png)
Editing Commands
The following table presents the commands to edit the configuration settings in the
Multicam Configuration window when the field has been selected (using the TAB key).
In text fields, you can directly type the requested value for a selected field.
Command description
Command key
Increasing the value
(or displaying the next value in the list)
SPACEBAR
Decreasing the value
(or displaying the previous value in the list)
SHIFT+SPACEBAR
Moving the cursor position within a text field
SHIFT+ RIGHT ARROW /
LEFT ARROW
Resetting the value of the selected setting
F5
Resetting all values of all settings in the current tab
for the selected configuration
CTRL+F5
Resetting all values of all settings in all tabs for the
selected configuration
CTRL+SHIFT+F5
Applying changes
ALT+A
Leaving without applying changes
ESC, ENTER
Enabling Values in a List
For some settings, you need to enable values in a list of displayed values. This is, for
example, the case with the selection of pages (receive pages, protect pages) in the
Operation tab.
The enabled pages are highlighted in blue, and the disabled pages are not highlighted.
To enable a list of values for a given setting, proceed as follows:
1. Select the list of values with the TAB key.
Once the list of values is selected, the enabled values stay highlighted in blue, and the
disabled values are highlighted in pink.
2. On the keyboard, type the page numbers you want to enable. They become
highlighted in blue.
3. Apply the changes with ALT+A, and confirm the action.
In the Web-Based Interface
Navigation and Editing Commands
The navigation and editing commands in the web-based interface are the commonly used
commands in a web-based interface. The command buttons available are the following
ones:
50
3. Multicam Configuration
EVS Broadcast Equipment S.A.
Issue 11.02.A July 2013