AASTRA 6735i User Guide EN - Manual (Page 99)

Line Keys, Programmable Keys, and Softkeys
41-001451-00 REV01 – 06.2013
92
Using the Park Call/Pickup Parked Call Feature
Use the following procedure on the IP phone to park a call and pick up a parked call.
Park a Call
9. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
10. Click Save Settings.
11. Click on Reset, then click Restart to restart the IP phone and apply the changes.
Programmable Keys
12. Select from "Key 1" through "Key 6".
13. In the "Type" field, select Park.
14. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
The” Value” and “Line” fields are configured by the Administrator.
15. Select from "Key 1" through "Key 6".
16. In the "Type" field, select Pickup.
17. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
The” Value” and “Line” fields are configured by the Administrator.
18. Click Save Settings.
19. Click on Reset, then click Restart to restart the IP phone and apply the changes.
Expansion Module Keys
20. Select from “Key 1” through “Key 36” (M670i).
or
Select from “Key 1” through “Key 60” (M675i).
21. In the "Type" field, select Park.
22. (M675i) In the "Label" field, enter a label to display on the IP phone for this key.
23. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
The” Value” and “Line” fields are configured by the Administrator.
24. Select from “Key 1” through “Key 36” (M670i).
or
Select from “Key 1” through “Key 60” (M675i).
25. In the "Type" field, select Pickup.
26. (M675i) In the "Label" field, enter a label to display on the IP phone for this key.
27. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
The” Value” and “Line” fields are configured by the Administrator.
28. Click Save Settings.
29. Click on Reset, then click Restart to restart the IP phone and apply the changes.
1. While on a live call, press the "Park" key.
2. Perform the following for your specific server: