AASTRA 6735i User Guide EN - Manual (Page 185)

Additional Features
41-001451-00 REV01 – 06.2013
178
Configuring “Preferred Line” and “Preferred Line Timeout” Using the Aastra Web UI
Use the following procedure to configure the Preferred Line and Preferred Line Timeout feature using the Aastra Web UI.
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
2. In the “Preferred Line” field, select a preferred line to switch focus to after incoming or outgoing calls end on the
phone. Default is 1. Valid values are:
• None (disables the preferred line focus feature)
• 1 to 9
For example, if you set the preferred line to “1”, when a call (incoming or outgoing) ends on the phone (on any line),
the phone switches focus back to Line 1.
3. In the “Preferred Line Timeout” field, enter the amount of time, in seconds, that the phone switches back to the
preferred line after a call (incoming or outgoing) ends on the phone, or after a duration of inactivity on an active line.
Default is 0. Valid values are:
• 0 to 999
4. Click Save Settings.