AASTRA 6735i User Guide EN - Manual (Page 105)

Line Keys, Programmable Keys, and Softkeys
41-001451-00 REV01 – 06.2013
98
Speeddial/Xfer
The Speed Dial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Xfer key
allows a call to be transferred to other recipients blindly or consultatively. The Speeddial/Xfer key combines the Speed Dial
and Xfer key's functionality together allowing the user to transfer calls or use Speeddial with one key.
Speed Dial/Xfer Key Requirements and Functionality
The Speed Dial/Xfer key has the following capabilities:
• Speeddial/Xfer and Speed Dial
When the phone is in the “Idle” state, pressing the Speeddial/Xfer key causes the phone to go offhook and dial the pre-
defined extension.
• Speeddial/Xfer and Blind Transfer
When the phone is connected to a call, pressing the Speeddial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message “Transfer Failed” displays, and you can reconnect the call (get the call back) by press-
ing the line key again.
• Speeddial/Xfer and Call Forward
When the phone is in the “Ringing” state, pressing the Speeddial/Xfer key forwards the call to the predefined extension.
15. In the “Line” field, select the line for which you want to use the key functionality.
Valid values are:
• global
• 1 through 9
16. Click Save Settings.
Note:
It is recommended that you enable the “Switch UI Focus to Ringing Line” parameter when using the Speed Dial/Xfer
feature. For more information about this parameter, see
“Switch UI Focus to Ringing Line” on page 173 .