AASTRA 6735i User Guide EN - Manual (Page 162)

Managing Calls
155
41-001451-00 REV01 – 06.2013
10. Click on Basic Settings->Preferences->General.
11. In the “Call Forward Key Mode” field, select a call forward mode to use on the phone. Valid values are: Account,
Phone, Custom. Default is Account.
• Account - (default) The account mode allows you to configure CFWD on a per account basis. Pressing a configured
CFWD key applies to the account in focus.
• Phone - The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or No
Answer). When you configure the initial account, the phone applies the configuration to all other accounts. (In the
Aastra Web UI, only the account you configured is enabled. All other accounts are grayed out but set to the same
configuration.) Using the Aastra Web UI, if you make changes to that initial account, the changes apply to all
accounts on the phone.
• Custom - The Custom mode allows you to configure CFWD for a specific account or all accounts. You can configure
a specific state (All, Busy, and/or No Answer) for each account independently or all accounts.On the 6735i, you
can set all accounts to All On, All Off, or copy the configuration for the account in focus to all other accounts using
a CopytoAll softkey.
Note:
If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if
the mode was set to “Phone”.
12. Click Save Settings.
The changes takes affect immediately without a reboot.