AASTRA 7446ip (5446ip) for MD Evolution User Guide EN - Manual (Page 31)

Incoming Calls
4 Incoming Calls
Incoming calls are indicated by a ring signal and a presentation of name or
number or both on either line button.
The ring signal differs depending on whether the incoming call is internal or
external:
• Internal calls are identified by one long signal followed by a long pause.
• External calls are identified by two short signals followed by a short pause.
4.1 Answer Calls
An incoming call is indicated by a ring signal and a flashing indicator lamp.
Handset: Lift the handset. The call is automatically received on Line 1.
Handsfree: Press the Line 1 button to answer without lifting the handset.
(You can then switch to the handset simply by lifting the handset.)
To reject an incoming call, tap the Reject button.
4.2 Answer a Second Incoming Call
You have two access lines for incoming and outgoing calls (Line 1 and Line 2)
and a third access line for outgoing calls only (Inquiry). All lines have the same
extension number. This feature is called triple access line.
You normally make and receive calls on Line 1 , and you make inquiry calls by
tapping the Inquiry button. Line 1 is the main line for incoming and outgoing
calls. Line 2 is reserved for incoming calls when Line 1 is busy, and Inquiry
is reserved for outgoing calls when Line 1 is busy.
When you tap line key, the ongoing call is automatically put on hold. To
terminate the ongoing call, press C before answering the second call by tapping
the line button.
A second incoming call is indicated by a blinking Line 2 button and a
presentation of number (and possibly name) of the second caller.
25 7/1553-DBC 446 01 Uen B4 2008-09-16